Simple Steps to Create a Bathroom Design Plan

If you plan to add or renovate a bathroom in your home, you’d do well to follow a design plan. This plan will help you focus on the things that matter most in a bathroom – space, functionality, and budget – than in the implements – tiles, sinks, tubs, and others.


Determine a budget


Whether you’re adding or remodeling a bathroom, remember that there is no room in the house that requires more labor or costs more money than the bathroom. The plumbing, electrical wiring, moisture content, and bathroom design plan create serious demands on a house owner. This is very true for bathroom remodeling. Sometimes, it’s even cheaper to add a new one than to renovate an old one. Renovating a bathroom is usually a more labor-intensive process as it requires removing old bathroom amenities and tiresome installation of tiles and plumbing. In fact, around 60 to 70 percent of your entire budget will only go to labor expenses, while only 30 to 40 percent will go to the materials.


Try to canvass and do a quick check on the cost of tiles, fixtures, sinks, and other materials. If your budget for the materials is limited, there is no shortage of affordable items for your bathroom. If you look hard enough, you might find a shower door for as little as $300. As for the bathtub, the price can range from $200 to $2000. If money is not an issue at all, then the next thing that you basically need to consider is the amount of available space.


Consider the amount of available space


Do you plan to install a bathtub? The usual size of a typical bathtub deck is no less than 3 1/2 ft. wide and approximately 7 ft. long. A two-sink counter, on the other hand, is nearly 6 ft. long and 2 ft. deep, while the shower is more or less 4 ft. square. So, before you insist on creating the same bathroom design plan you saw in one magazine, make sure that you consider the amount of space available for your bathroom. If the available floor plan is small, do away with the bathtub and instead use a shower panel with a rain shower head or one with multiple jets for that massaging effect. You can take a look at this page for extensive reviews of the best shower panels available in the market.


Think about the functionality


Now, that you have set the budget and determined the space available for your bathroom, it’s time to consider the functionality issues of the room. First, you need to know the essential functions and basic elements of your shower area: bathing, washing, and toileting. Before thinking of any other additional features, fulfill these obvious requirements first. Design a specific space for each of these functions. For your bathing purposes, figure out if you really require a separate bathtub and shower or just a bathtub or just a shower. Moreover, determine if the toilet needs a room of its own or whether it can be part of the open bathroom. For washing purposes, design a contained counter area or a wall against which a sink can be installed.


Coming up with good bathroom design plans can be quite a struggle, especially if you don’t know where to start. Basically, all you need to do is set a budget, determine the available space for the bathroom, consider the functionality, and use only compatible materials. In just four simple steps, you can already easily design a bathroom that will boost the value of your home.